HIKVISION DS-KH8520-WTE1 User Manual

Figure 3-20 Local Network Conguraon
2.
Enter the local IP address, IP address subnet mask, gateway, port No. and HTTP
port No..
3.
Click Save to enable the sengs.
Note
•
The default port No. is 8000.
•
Aer eding the local network parameters of device, you should add the
devices to the device list again.
SIP Server Conguraon
Steps
1.
Click SIP Server Conguraon to enter the conguring the SIP parameters page.
Video Intercom Indoor
Staon Conguraon Guide
40

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English