HIKVISION DS-KH8520-WTE1 User Manual

Figure 3-22 DNS Sengs
Congure Mobile Client Connecon
Congure Hik-Connect server parameters before viewing videos via mobile client.
Before You Start
Make sure the indoor staon connects to the network.
Steps
1.
Click Hik-Connect to enter the conguring the Hik-Connect sengs page.
2.
Enable Enable Hik-Connect.
Note
•
To enable Hik-Connect service, you need to create a vericaon code or
change the vericaon code.
•
The vericaon code should be 6 to 12 leers or numbers, case sensive.
You are recommended to use a combinaon of no less than 8 leers or
numbers.
3.
Enter the Vericaon Code and conrm the vericaton code.
4.
Click OK.
5.
Enable Custom and edit Service Address.
6.
Enter the Vericaon Code.
7.
Click Save to enable the sengs.
8.
Oponal: Click Refresh to refresh the sengs.
Group Network
Sengs
Click Group Network Sengs to enter the group network sengs page.
Video Intercom Indoor
Staon Conguraon Guide
42

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English