Network Video Recorder User Manual
237
Figure 18-2 General Settings Interface
Step 2 Configure the following settings:
Language: The default language used is English.
Output Standard: Select the output standard to NTSC or PAL, which must be the same with
the video input standard.
Resolution: You can configure the VGA/HDMI resolution and VGA2/HDMI 2 resolution, and
up to 4K (3840 × 2160) resolution is selectable for the VGA/HDMI output.
Time Zone: Select the time zone.
Date Format: Select the date format.
System Date: Select the system date.
System Time: Select the system time.
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
Enable Wizard: Enable/disable the Wizard when the device starts up.
Enable Password: Enable/disable the use of the login password.
Step 3 Click the Apply button to save the settings.
To Next Page
Loading...
