Hill-Rom MetaNeb System User Manual

10 The MetaNeb® System User Manual (174432 REV 7)
Assemble the Controller System
ASSEMBLE THE CONTROLLER SYSTEM
Make sure you have all the parts that are listed on the contents list.
Stand Assembly and Controller Installation
NOTE:
Some older devices may have a different stand. For a stand that differs
from that shown, refer to the instructions that were supplied with the
stand.
Connect the Oxygen Hose
1. Attach, and hand tighten, the oxygen hose to the connector on the
controller.
2. Install the applicable hose adapter on the free end of the hose, as
necessary for your facility.
3. Attach, and hand tighten, the free end of the oxygen hose to an
oxygen source.

Hill-Rom MetaNeb System Specifications

General

Brand	Hill-Rom
Model	MetaNeb System
Category	Medical Equipment
Language	English