20 The MetaNeb® System User Manual (174432 REV 7)
Move the Stand
MOVE THE STAND
1. Disconnect the oxygen hose from the facility connection, and put the
hose around the hanger bracket.
2. Unlock the two locking casters.
3. Move the stand to the applicable location.
4. Lock the two casters.
5. Connect the oxygen hose to the facility connection.
CLEANING
WARNING:
Failure to follow these cleaning instructions could cause injury or
equipment damage.
WARNING:
Failure to discard the SPU circuit in accordance with facility protocol could
cause the spread of infection.
WARNING:
Do not steam clean the controller, stand, or circuit. Injury or equipment
damage could occur.
WARNING:
Do not expose the unit to excessive moisture. Injury or equipment
damage could occur.
CAUTION:
Do not use harsh cleansers, solvents, or detergents. Equipment damage
could occur.
CAUTION:
Failure to follow the cleaner manufacturers instructions could cause
equipment damage.
To Next Page
Loading...
Need help?
General
