The MetaNeb® System User Manual (174432 REV 7) 23
Cleaning
NOTE:
Before the next use of the system, do these:
• Examine the nebulizer for cracks or other damage. If there is
damage, replace the circuit. Refer to “Circuit Part Numbers” on
page 38.
• Assemble the nebulizer. Refer to “Add Medication to the
Nebulizer” on page 13.
• Do the “Pre-Use Check” on page 14.
• For units used with an in-line ventilator, do the “Pre-Use Check
For In-Line Use with a ventilator” on page 15.