Component Handling
Chapter 6: General Procedures
Page 6 - 2 Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,
Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)
Steam Cleaning
Do not steam clean the bed. Excessive moisture can damage mechanisms and
components in this unit.
Hard to Clean Spots
To remove difficult spots or stains, use standard household cleaners and a soft
bristle brush. To loosen heavy, dried-on soil or excreta, it may be necessary to
first saturate the spot.
Disinfecting
Dilute disinfectants and germicides as specified on the manufacturer’s label.
Component Handling
Make sure that your hands are clean, and only handle the PC boards
by their edges to prevent component damage.
Wear an antistatic strap when you handle electronic components.
Failure to do so could cause component damage
Put the removed PC boards in antistatic protective bags to ship or store
the PC boards. Equipment damage can occur.
PC Board
Be careful with the PC board when you service it, damage or malfunctions may
occur:
• PC board damage
• Shortened PC board life
• Unit malfunctions
To Next Page
Loading...
