EasyManuals Logo

Hill-Rom P1440A User Manual

Hill-Rom P1440A
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
7.1 IV Pole—P1445
Chapter 7: Accessories
Page 7 - 2 Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,
Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)
7.1 IV Pole—P1445
Tools required: None
The two-sectioned, telescopic IV pole fits into any of the four socket locations
on the bed: two at the head end, and two at the foot end.
Installation
WARNING:
Install the IV pole correctly. Failure to do so could cause injury or
equipment damage.
1. Put the IV pole (A) into the socket (B).
2. Turn the lower section of the IV pole clockwise to lock it in place (see
figure 7-1 on page 7-2).
Figure 7-1. IV Pole

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hill-Rom P1440A and is the answer not in the manual?

Hill-Rom P1440A Specifications

General IconGeneral
BrandHill-Rom
ModelP1440A
CategoryMedical Equipment
LanguageEnglish

Related product manuals