Hillstone SG-6000-E2800 - Figure 1-21: SG-6000-E1100 (4 G Version) Back Panel; Table 1-17: Back Panel Description of SG-6000-E1100 (4 G Version)

12
Chapter 1 Introduction | Hillstone
Hillstone SG-6000 E-Series Hardware Reference Guide
SG-6000-E1100 (4G version) uses the power adapter. The back panel of SG-6000-
E1100 (4G version) has 1 power supply socket, 1 Console port, 1 CLR button, 9
Gigabyte Ethernet ports, 1 USB port, 1 grounding screw, 1 security keyhole, and 2
SMA connectors for 4G antennas.
Figure 1-21: SG-6000-E1100 (4G version) Back Panel
Table 1-17: Back Panel Description of SG-6000-E1100 (4G version)
No.
Label
No.
Label
No.
Label
1
SMA connector
for 4G antenna
4
CON: Console port
7
e0/0 - e0/8: Gigabit
Ethernet port
2
DC POWER: DC
power interface
5
SIM: SIM card slot
8
Security keyhole
3
CLR: CLR button
6
USB: USB port
9
SMA connector for
4G antenna
SG-6000-E1100 (WLAN+4G version) uses the power adapter. The back panel of
SG-6000-E1100 (WLAN+4G version) has 1 power supply socket, 1 Console port, 1
CLR button, 9 Gigabyte Ethernet ports, 1 USB port, 1 grounding screw, 1 security
keyhole, 2 SMA connectors for 4G antennas, and 2 SMA connectors for WLAN
antennas.