Hillstone SG-6000-E2800 - Table 1-29: SFP+ Optical Module Attributes; Table 1-30: QSFP+ Port Attributes

24
Chapter 1 Introduction | Hillstone
Hillstone SG-6000 E-Series Hardware Reference Guide
Table 1-29: SFP+ Optical Module Attributes
Attribute
Description
Short-haul
Multimode
Optical
Module
(850nm)
Medium-haul
single-mode
Optical
Module
(1310nm)
Long-haul
Single-mode
Optical Module
(1550nm)
Ultra-long Haul
Single-mode
Optical Module
(1550nm)
Connector
LC
Fiber Type
62.5/125μm
multi-mode
fiber
9/125μm
single-mode
fiber
9/125μm
single-mode fiber
9/125μm
single-mode fiber
Maximum
Transmission
Distance
0.033km
10km
40km
80km
Central
Wavelength
850nm
1310nm
1550nm
1550nm
Optional
Factory
Module
TRAN-SR-SFP+
TRAN-LR-SFP+
TRAN-SFP+-LX40
TRAN-SFP+-LX80
Caution: When using the optical module of Hillstone Network factory, it is
recommended not to mix with other manufacturers' optical modules, otherwise some
abnormal problems may arise
QSFP+ Port
Table 1-30: QSFP+ Port Attributes
Attribute
Description
Connector
QSFP+
Frame Format
Ethernet_II
Ethernet_SNAP
Negotiation Mode
40GE
1*40Gbps
4*10GE
4*10Gbps
Caution: When the negotiation mode of QSFP+ port changed, you need to reboot
the device to make it effective.
Two types of QSFP+ optical module are supported. The optical modules are
available with LC-type connectors and MPO-type connectors and are all hot-
swappable.