To Next Page
E
Elizabeth ReyesSep 5, 2025
How to unlock the on/off button on a Hilti SCM 22-A?
- MMichael TrevinoSep 5, 2025
If the on/off button on your Hilti Saw is locked, it's likely due to the safety function. Simply press the safety lock to release it.
How to unlock the on/off button on a Hilti SCM 22-A?
If the on/off button on your Hilti Saw is locked, it's likely due to the safety function. Simply press the safety lock to release it.
Why is my Hilti SCM 22-A or battery getting very hot?
If your Hilti Saw or its battery is getting very hot, immediately switch off the circular saw, remove the battery, and keep it under observation, allowing it to cool down. This could be due to an electrical fault or the product being overloaded. Pay attention to the power and performance rating of the product before using it, i.e check its suitability for the job on hand. See 'Technical data' section.
What to do if my Hilti SCM 22-A Saw gets very hot?
If the Hilti Saw or its battery gets very hot, immediately switch off the circular saw, remove the battery, and keep it under observation. Allow it to cool down. This could be due to an electrical fault or because the product is overloaded. Pay attention to the power and performance rating of the product before using it and check its suitability for the job.
What to do if the LEDs indicate nothing on my Hilti SCM 22-A Saw?
If the LEDs on your Hilti Saw don't light up, it could be due to a couple of reasons. First, make sure the battery is fully inserted until you hear a double click. If that's not the issue, the battery might be discharged. In that case, try swapping it with a charged battery.
Why doesn't the battery engage with a double click on my Hilti SCM 22-A?
If the battery does not engage with an audible "double click" on your Hilti Saw, it could be because the retaining lugs on the battery are dirty. Clean the retaining lugs and refit the battery.
How to unlock the on/off button on my Hilti SCM 22-A Saw?
Press the safety lock.
Why does the battery on my Hilti Saw run down quickly?
If the battery on your Hilti Saw runs down more quickly than usual, it could be due to very low ambient temperature. Allow the battery to warm up slowly to room temperature.
Why does the running speed of my Hilti Saw suddenly drop?
If the running speed of your Hilti Saw suddenly drops considerably, it could be because the saw blade jams. Do not tilt the saw blade.
What does it mean when 1 LED blinks on my Hilti Saw?
If 1 LED is blinking on your Hilti Saw, it could mean that the battery is discharged. Replace the battery and charge the empty one. It could also indicate that the battery is too hot or too cold. Bring the battery to the recommended working temperature.
Why does the saw blade stall on my Hilti SCM 22-A Saw?
The saw blade stalls because the saw advance pressure is too high. Reduce advance pressure and switch the product back on.
General
