To Next PageTo Next PageWhy does my Hilti SCW 22-A Saw get very hot?
If the circular saw gets very hot, immediately switch it off, remove the battery, and keep it under observation. Allow the battery to cool down. This could be due to an electrical fault or because the product is overloaded. If overloaded, select a tool that is suitable for its intended use.
How to fix Hilti SCW 22-A when LEDs indicate nothing?
If the LEDs indicate nothing, make sure that the battery is fully inserted. If it is not, insert the battery. Also, the battery might be discharged, so charge the battery. Finally, the battery might be too hot or too cold. In that case, bring the battery to the correct ambient temperature.
What to do if 4 LEDs blink on my Hilti Saw?
If 4 LEDs blink on your Hilti Saw, it means that the circular saw was overloaded briefly, or the overheating prevention cut-out has been activated. To solve this, release the control switch and then press it again. Also, allow the circular saw to cool down and clean the air vents.
What does it mean when 1 LED blinks on my Hilti Saw?
If 1 LED blinks on your Hilti Saw, it could be due to a discharged battery, so charge the battery. It could also mean that the battery is too hot or too cold; bring the battery to the correct ambient temperature.
Why does the battery run down quickly on my Hilti SCW 22-A Saw?
If the battery runs down more quickly than usual in your Hilti Saw, it indicates that the battery condition is not optimal. To resolve this, replace the battery.
What to do if my Hilti Saw doesn’t restart after the blade stalls?
If the product doesn’t restart by itself after the saw blade has stalled, it means that the overload cut-out has been activated. To solve this, press the switch-on interlock and the on/off button again.
General| Blade diameter | 165 mm |
|---|---|
| Idle speed (max) | 4000 RPM |
| Cutting depth (45º) | 42 mm |
| Cutting depth (90º) | 57 mm |
| Sound pressure level | 93 dB |
| Vibration level (wood cutting) | 1.2 m/s² |
| Product color | Black, Red |
| Country of origin | Germany |
| Dust extraction port | Yes |
| Power source | Battery |
| Diamond disc | - |
| Battery included | No |
| Quantity per shipping (inner) case | 1 pc(s) |
Weight and Dimensions| Package depth | 898 mm |
|---|---|
| Package width | 5400 mm |
| Package height | 2000 mm |
| Package weight | 1345 g |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols.
Specifies the intended use of the cordless circular saw and its limitations.
Provides technical specifications for the SCW 22-A cordless circular saw.
Covers general safety warnings applicable to all power tools for safe operation.
Presents safety rules specifically for operating saws, including cutting procedures and kickback.
Offers further general safety advice, including personal safety and workplace considerations.
Provides step-by-step instructions for removing and fitting saw blades.
