HIMA HIMax X-COM 01 E User Manual

4 Start-Up X‑COM 01 E
Page 36 of 46 HI 801 566 E Rev. 13.00.00
4.3.7 Network Ports in Use for Ethernet Communication
UDP ports
Use
123
SNTP (time synchronization between controller and remote I/O, and external
devices).
502
Modbus salve (can be changed by the user).
6010
SafeEthernet and OPC.
8000
Programming and operation with SILworX..
8001
Port on the remote I/O for configuring the remote I/O using the controller.
8004
Port on the controller for configuring the remote I/O using the controller.
34964
PROFINET IO endpoint mapper (required for establishing the connection).
49152
PROFINET IO RPC server.
49153
PROFINET RPC client
Xxx
ComUserTask assigned by the user.
May not be used with another protocol.
Table 20: Network Ports (UDP Ports) in Use
TCP ports
Use
502
Modbus salve (can be changed by the user).
Xxx
TCP SR assigned by the user.
Xxx
ComUserTask assigned by the user.
May not be used with another protocol.
Table 21: Network Ports (TCP Ports) in Use

HIMA HIMax X-COM 01 E Specifications

General

Brand	HIMA
Model	HIMax X-COM 01 E
Category	Control Unit
Language	English