HIMA HIMax X-COM 01 E User Manual

X‑COM 01 E 1 Introduction
HI 801 566 E Rev. 13.00.00 Page 5 of 46
1 Introduction
This manual describes the technical characteristics of the module and its use. It provides
information on how to install, start up and configure the module in SILworX.
1.1 Structure and Use of This Manual
The content of this manual is part of the hardware description of the HIMax programmable
electronic system.
This manual contains the following main chapters:
▪ Introduction
▪ Safety
▪ Product description
▪ Start-up
▪ Operation
▪ Maintenance
▪ Decommissioning
▪ Transport
▪ Disposal
Additionally, the following documents must be taken into account:
Document
Content
Document no.
HIMax system manual
Hardware description of the
HIMax system
HI 801 001 E
HIMax safety manual
Safety functions of the HIMax
system
HI 801 003 E
HIMax maintenance
manual
Description of significant
operational and maintenance
actions.
HI 801 171 E
Communication manual
Description of SafeEthernet
communication and of the
available protocols.
HI 801 101 E
Automation security manual
Description of automation
security aspects related to the
HIMA systems.
HI 801 373 E
SILworX first steps manual
Introduction to SILworX
HI 801 103 E
SILworX online help (OLH)
Instructions on how to use
SILworX
---
Table 1: Additional Applicable Manuals
Registered customers can download the product documentation from the HIMA Extranet.
1.2 Target Audience
This document is aimed at the planners, design engineers, programmers and the persons
authorized to start up, operate and maintain the automation systems. Specialized knowledge of
safety-related automation systems is required.

HIMA HIMax X-COM 01 E Specifications

General

Brand	HIMA
Model	HIMax X-COM 01 E
Category	Control Unit
Language	English