3 Product Description X‑COM 01 E
Page 10 of 46 HI 801 566 E Rev. 13.00.00
3.2 Safety Function
No safety function is performed by the communication module.
3.2.1 Response in the Event of a Fault
If faults occur, the module enters the temporary STOP_ERROR state. The module is then
rebooted and restarted from the INIT state.
No process data is exchanged with external communication partners in the STOP_ERROR
state. No process data is transferred to the process module.
3.3 Scope of Delivery
To operate, the module must be installed on a matching connector board. The connector board
is described in Chapter 3.7.
The connector board is not included within the scope of delivery of the module.
The module can be equipped with fieldbus submodules ex-factory. The specifications are made
with the order using the module's part number; refer to the communication manual for more
details (HI 801 101 E).
To Next Page
Loading...
