Himoinsa CEM7 User Manual

OPTIONS | PAGE 53
8. OPTIONS
New functions can be added to the CEA7 control unit using the CAN bus
connection via expansion modules.
8.1 DISPLAY SCREEN (REPETITIVE)
The control units CEA7 and CEM7 allow display screens to be added to the
installation. This device displays the current status of the control unit, and if it is
in automatic mode, can control the functioning of the genset. The display screen
does not allow the master control unit mode to be changed.
Also, the display screen shows the status of the control unit via error and status
LEDs and the programming of operating parameters.

Himoinsa CEM7 Specifications

General

Brand	Himoinsa
Model	CEM7
Category	Control Unit
Language	English