144
Saving Measurement Data
Setting the header, delimiter, and quotation mark character
(1)
D
ATE (save date and time)
Sets whether to use the save date and time as the text le’s header.
1
Select either the ON key (save as the
header) or the OFF key (do not save as
the header).
2
Touch the EXIT key.
The dialog box will be closed.
When ON When OFF
"HIOKI E.E. CORPORATION","IM3536","Ver. 1.00",
"Serial No. 123456789"
"DATE","11-11-30"
"TIME","10:10:06"
"FREQ","1.0000E+03","Hz"
"V","1.000","V"
"LIMIT","OFF"
"RANGE","AUTO","10k","ohm"
Display when ON:
Save date: November 30, 2011; save time: 10:10:06
"HIOKI E.E. CORPORATION","IM3536","Ver. 1.00",
"Serial No. 123456789"
"FREQ","1.0000E+03","Hz"
"V","1.000","V"
"LIMIT","OFF"
"RANGE","AUTO","10k","ohm"
To Next Page
Loading...
