Hioki MEMORY HiLOGGER LR8450 Quick Start Manual

10
Operating Precautions
Measurement precautions
DANGER

Do not input a voltage that exceeds the measurement module’s
maximum input voltage, maximum rated terminal-to-ground voltage, or
maximum rated channel-to-channel voltage to any channel.

Do not input a voltage to a resistance measurement terminal.
Measurement modules have di󰀨erent maximum input voltages, maximum rated
terminal-to-ground voltages, and maximum rated channel-to-channel voltages. For
more information about maximum input voltages, maximum rated terminal-to-ground
voltages, and maximum rated channel-to-channel voltages, see “Specications”
(p. 87).
Doing so could cause electric shock or damage the instrument.

Do not use the instrument or measurement modules to measure a main
power supply circuit.
The U8550, U8551, U8552, U8553, LR8530, LR8531, LR8532, and LR8533
measurement modules have terminal-to-ground voltages that qualify as CAT II, but
they cannot be used to perform CAT II, CAT III, or CAT IV measurement.
Never input a CAT II, CAT III, or CAT IV voltage across measurement terminals.
Doing so could cause electric shock or damage the instrument.

Turn o󰀨 power to the circuit under measurement before performing
measurement.
Failure to do so could cause electric shock or damage the instrument.
WARNING

Do not allow the instrument to get wet.

Do not operate the instrument with wet hands.
Doing so could cause electric shock.
E󰀨ect of induction potential
Displayed values can frequently uctuate due to induction potential even when no
voltage is applied. This, however, is not a malfunction.
HIOKI LR8450A963-02

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English