Hioki MEMORY HiLOGGER LR8450 Quick Start Manual

44
Installing a Battery Pack
Charging the Battery Pack
You can charge the Battery Pack by connecting the Z1014 AC Adapter to the instrument or the
Z1008 AC Adapter to the wireless module. The Battery Pack will continue to be charged even while
the instrument or the wireless module is turned o󰀨. (p.46)
The CHARGE LED will turn orange while the Battery Pack is being charged. (On the instrument,
the CHARGE LED will light up about 5 seconds after charging begins.)
Charging will stop once the Battery Pack is fully charged, and the CHARGE LED will turn o󰀨.
Rough charge time (LR8450/LR8450-01, wireless modules)
• Approx. 7 h (when charging a Battery Pack with little remaining battery life)
Continuous operating time on Battery Pack power
Instrument
Approximate continuous operating time on one Battery Pack (reference value)
Approximate continuous
operating time
Backlight brightness
Approx. 2 h 5 (maximum brightness)
After being fully charged, with one U8551 Universal Unit connected, at an ambient temperature of
23°C
Enabling the backlight saver or lowering the backlight brightness (dimming the backlight) will
increase the operating time.
See “Backlight saver” and “Backlight brightness” in the Instruction Manual.
When using two Battery Packs, the instrument will be able to operate continuously for about twice
as long as on one Battery Pack.
The amount of time the instrument can operate on the Battery Pack will decrease as the
temperature falls.
Even if the Battery Pack is fully charged, the instrument may not operate if the Battery Pack
becomes cold. Attach two Battery Packs in the instrument, warm the Battery Pack to room
temperature, or replace the Battery Pack with a standby Battery Pack.
Displaying the monitor and individual settings screens use battery power even if you have not yet
started measurement because those screens collect data.
Wireless modules
Rough continuous operating time when operating on the Battery Pack power only (reference value)
Modules
Approximate continuous
operating time
LR8530 Wireless Voltage/Temp Unit Approx. 9 h
LR8531 Wireless Universal Unit Approx. 7 h
LR8532 Wireless Voltage/Temp Unit Approx. 9 h
LR8533 Wireless High Speed Voltage Unit Approx. 9 h
LR8534 Wireless Strain Unit Approx. 5 h
After being fully charged, at an ambient temperature of 23°C
HIOKI LR8450A963-02

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English