Hioki RM3548 - Compensating for Thermal Effects (Temperature Correction)

Hope Electronics Technology Manual Edition V1.0 41
4.3 Compensating for Thermal Effects (Temperature Correction
(TC))
This function converts a measured resistance value, based on the reference
temperature, to display the converted value. For the principles of temperature
correction, see “Appx. Temperature Correction Function (TC)”.
To perform temperature correction, connect the Temperature Sensor to the
TEMP.SENSOR terminal on the side of the instrument. Before connecting the
sensor, be sure to read “Connecting the Temperature Sensor (When Using TC
or AT)”