Hope Electronics Technology Manual Edition V1.0 5
Safety Notes
The instrument is designed to conform to IEC 61010 Safety Standards, and
has been thoroughly tested for safety prior to shipment. However, using the
instrument in a way not described in this manual may negate the provided safety
features.
Before using the instrument, be certain to carefully read the following safety
notes.
Note
Mishandling during use could result in injury or death, as wellas damage to
the instrument. Be certain that you understand the instructions and precautions
in the manual before use.
Notation
This manual contains information and warnings essential for safe operation
of the instrument and for maintaining it in safe operating condition. Before using
the instrument, be certain to carefully read the following safety notes.
Indicates very important message in this manual. When the symbol is
printed on the instrument, refer to a corresponding topic in the Instruction
Manual.
indicates DC (direct current)
indicates afuse
indicates earth terminal
To Next Page
Loading...
Need help?
General
