Hirschmann iFLEX5 - Tip Height Limitation

Operator's Manual iFLEX5
© Hirschmann Rev. E 11/12/08 190147_E
26
5.1.2 Tip Height Limitation
Programmable function for the limitation of the tip height
• Set tip height / delete height limitation:
8
Call LIMIT Setting.
Press the corresponding
figure to select function "tip
height limitation".
Press key
set: delete:
Move the tip to
the required
upper limit.
set
present tip height
as upper limit
delete tip
height limitation
Display shows
symbol and value
of the
programmed
height limit
Display shows
symbol without
values
quit function