Synchronizing the system time in the
Basic - L3P
Release
4.0
11/07
7.1
Entering the time
3
The "Local Offset" is for displaying/entering the time difference be-
tween the local time and the "IEEE 1588 / SNTP time". With "Set off-
set from PC", the Switch determines the time zone on your PC and
uses it to calculate the local time difference.
enable Switch to the Priviledged EXEC mode.
configure Switch to the Configuration mode.
sntp time <YYYY-MM-DD
HH:MM:SS>
Set the system time of the Switch.
sntp client offset <-1000 to
1000>
Enter the time difference between the local time
and the "IEEE 1588 / SNTP time".
To Next Page
Loading...
Need help?
General
