Network load control
44
8.6
VLANs
Basic - L3P
Release
4.0
11/07
Figure 46: Defining the VLAN membership of the ports.
Ports 1.1 to 1.3 are assigned to the terminal devices of the Yellow
VLAN, and ports 2.1 to 2.4 are assigned to terminal devices of the
Green VLAN. Because terminal devices usually do not sent data pack-
ets with a tag, you select the U setting here.
Port 1.4 functions as the uplink port to the next Switch. It is assigned the
setting M. Thus it can forward VLAN information.
To Next Page
Loading...
