Hirschmann MACH 4000 User Manual

Setting up configuration environment
6
A.1 Setting up DHCP/BOOTP server
Basic - L3P
Release 4.0 11/07
Figure 68: Adding static addresses
 Enter the MAC address of the Switch.
 Enter the IP address of the Switch.
 Select the configuration profile of the Switch.
 Click Apply and then OK.
Figure 69: Entries for static addresses
 Add an entry for each device that will get its parameters from the DHCP
server.

Hirschmann MACH 4000 Specifications

General

Brand	Hirschmann
Model	MACH 4000
Category	Network Router
Language	English