Access to the user interfaces
Basic - L3P
Release
4.0
11/07
1.3
Web-based Interface
15
Figure 6: Login window
Select the desired language.
In the drop-down menu, you select
– user, to have read access, or
– admin, to have read and write access
to the switch.
The password "public", with which you have read access, appears in
the password field. If you wish to have write access to the Switch, then
highlight the contents of the password field and overwrite it with the
password "private" (default setting).
Click on OK.
The website of the Switch appears on the screen.
Note: The changes you make in the dialogs are copied to the switch when
you click on "Write". Click on "Load" to update the display.
Note: You can block your access to the Switch by entering an incorrect
configuration.
Activating the function "Cancel configuration change" in the "Load/Save"
dialog enables you to return automatically to the last configuration after a
set time period has elapsed. This gives you back your access to the
Switch.
To Next Page
Loading...
Need help?
General
