Content
User Manual - Industrial Protocols
Release
4.0
11/07
5
6.6 Access Control Lists (ACL). 91
6.6.1 Description of prioritizing with ACLs 92
6.6.2 Description of IP-based ACLs. 93
6.6.3 Description of MAC-based ACLs 94
6.6.4 Configuring IP ACLs 95
6.6.5 Configuring MAC ACLs 97
6.6.6 Configuring priorities with IP ACLs 98
6.6.7 Specifying the sequence of the rules 100
7 Synchronizing the system time in the network 101
7.1 Entering the time 102
7.2 SNTP 104
7.2.1 Description of SNTP 104
7.2.2 Preparing the SNTP coordination 105
7.2.3 Configuring SNTP 106
7.3 Precision Time Protocol 110
7.3.1 Description of PTP functions 110
7.3.2 Preparing the PTP configuration 114
7.3.3 Configuring PTP 115
7.4 Interaction of PTP and SNTP 118
8 Network load control 121
8.1 Direct packet distribution 122
8.1.1 Store-and-forward 122
8.1.2 Multi-address capability 122
8.1.3 Aging of learned addresses 123
8.1.4 Entering static address entries 124
8.1.5 Disabling the direct packet distribution 125
8.2 Multicast application 126
8.2.1 Description of the Multicast application 126
8.2.2 Example of a Multicast application 127
8.2.3 Description of IGMP Snooping 128
8.2.4 Description of GMRP 128
8.2.5 Setting up the Multicast application 130
8.3 Rate Limiter 135
8.3.1 Description of the Rate Limiter 135
8.3.2 Rate Limiter settings 135
To Next Page
Loading...
Need help?
General
