10
Installation MACH104
Release
08
01/2019
FCC note:
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference; (2) this device must accept any interference received,
including interference that may cause undesired operation.
Appropriate testing has established that this device fulfills the
requirements of a class A digital device in line with part 15 of the FCC
regulations.
These requirements are designed to provide sufficient protection against
interference when the device is being used in a business environment.
The device creates and uses high frequencies and can also radiate these
frequencies. If it is not installed and used in accordance with this
operating manual, it can cause radio transmission interference. The use
of this device in a residential area can also cause interference, and in this
case the user is obliged to cover the costs of removing the interference.
BSMI note for use in Taiwan
Warning! This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
Devices with a specification according to BSMI standards CNS 13438,
CNS 14336-1 and CNS 15663 are marked on the device label.
٬Ҕޣ;!
೭ࢂҘᜪޑၗૻౢ ࠔǴӧۚՐޑᕉნύ٬ҔǴёૈԋᓎυᘋǴӧ೭
To Next Page
Loading...
Need help?
General
