Installation MACH104
Release
08
01/2019
33
3 Making basic settings
Note: Two or more devices configured with the same IP address can cause
unpredictable operation of your network.
Install and maintain a process that assigns a unique IP address to every
device in the network.
When you install the device for the first time enter the IP parameters.
The device provides the following options for entering the IP parameters
during the first installation:
Configuration via DHCP (state on delivery)
Input via the V.24 interface
Input via the HiView or Industrial HiVision application. You find further
information about the applications HiView or Industrial HiVision on the
Internet at the Hirschmann product pages:
HiView
http://www.hirschmann.com/en/QR/INET-HiView
Industrial HiVision
http://www.hirschmann.com/en/QR/INET-Industrial-HiVision
Configuration via BOOTP
Configuration via DHCP (Option 82)
AutoConfiguration Adapter
Further information on the basic settings of the device can be found in the
“Basic Configuration” user manual.
To Next Page
Loading...
Need help?
General
