12
Installation MACH104
Release
08
01/2019
Relevant for installations in switch cabinets according to
UL 60950-1
Higher ambient air temperature during operation: If installed in a
closed switch cabinet or a multi-unit switch cabinet, the ambient air
temperature inside the switch cabinet during operation can be higher
than the ambient air temperature in the room. Install devices in
environments that are compatible with the maximum ambient air
temperature of the device.
Reduced air flow: When you install the device in a switch cabinet,
make sure that a sufficient air flow is guaranteed in order to safely
operate your devices.
Mechanical stress: Check for potential dangers resulting from
unevenly distributed weight when you install the device in a switch
cabinet.
Electric circuit overloading: Observe the effects of electric circuit
overloads on the overload current protection and the power supply
cables when you connect devices to the power supply. Refer to the
device parameters specified on the type plate of the device.
Safe grounding: Make sure that devices installed in switch cabinets
are grounded safely. When you install a device in a switch cabinet,
also watch out for power supply connections other than the direct
connections to the circuit branch (for example socket boards).
Recycling note
After usage, this device must be disposed of properly as electronic waste,
in accordance with the current disposal regulations of your county, state,
and country.
To Next Page
Loading...
Need help?
General
