Installation MACH104
Release
08
01/2019
45
Name Order number
AutoConfiguration AdapterACA21-USB (EEC) 943 271-003
AutoConfiguration AdapterACA11 943 751-001
Terminal cable 943 301-001
2-pin terminal block (50 pieces) 943 845-010
Bracket for fastening the casing 943 943-001
Bracket, long (+ 1.97 in (50 mm)), for fastening the casing (extra) 943 943-101
Network management software Industrial HiVision 943 156-xxx
OPC Server software HiOPC 943 055-001
Gigabit Ethernet SFP transceiver Order number
M-SFP-TX/RJ45 943 977-001
M-SFP-TX/RJ45 EEC 942 161-001
The following operating conditions apply to twisted pair transceivers:
Usable with:
- HiOS as of software version 03.0.00
- Classic Switch software, as of software version 04.1.00.
- HiSecOS as of software version 01.2.00
Do not use with the following devices:
- SPIDER II- MSP/MSM
- EES
Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.
Not applicable for combo and Fast Ethernet ports.
Only support of the autonegotiation mode including autocrossing.
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC EEC 943 896-001
M-SFP-MX/LC EEC 942 108-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC EEC 943 897-001
M-SFP-LX+/LC 942 023-001
M-SFP-LX+/ LC EEC 942 024-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC EEC 943 898-001
M-SFP-LH+/LC 943 049-001
M-SFP-LH+/LC EEC 942 119-001
SFP-GIG-LX/LC
a
a. You find further information on certifications on the Internet at the Hirschmann product
pages (www.hirschmann.com).
942 196-001
SFP-GIG-LX/LC EEC
a
942 196-002
To Next Page
Loading...
Need help?
General
