8
Installation MACH104
Release
08
01/2019
Supply voltage
The supply voltage is connected to the device casing through protective
elements exclusively.
The supply voltage is electrically isolated from the casing.
Device casing
Only technicians authorized by the manufacturer are permitted to open
the casing.
Never insert sharp objects (small screwdrivers, wires, etc.) into the
inside of the device.
Keep the ventilation slits free to ensure good air circulation.
Make sure there is at least 3.94 in (10 cm) of space in front of the
ventilation slits of the casing.
Mount the device horizontally or vertically, either as a desktop device,
in the switch cabinet (figure 12 on page 30) or on the wall (figure 14 on
page 31).
To Next Page
Loading...
Need help?
General
