EasyManua.ls Logo

Hisun HS294-2 - Brake Pedal; Range Gear Shift Lever

Hisun HS294-2
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE:
The turn signal light switch is only
operative when the key switch is in the
“ON” position.
If the emergency light switch is pressed to
the “ON” position while the turn signal is
activated, the indicated turning light will
flash and other will stay on.
Be sure to return switch to center position
after turning.
Head light Head turn signal lamp;
loads.
When driving on icy, wet or loose
surface, make sure the vehicle is
correctly loaded to avoid skidding or
loss of steering control. Reduce the
speed.
The brake pedal is the left pedal on the foot
board. Depress the pedal to slow or stop the
vehicle.
Brake pedal
4. Selecting the travel speed.
Range Gear Shift Lever
CAUTION:
To avoid personal injury:
Avoid changing gears when
ascending or descending a slope.
Before ascending or descending a
slope, shift to the “L” range to control
the vehicle speed.

Table of Contents