① Range gear shift lever pivot (spray type grease )
■ Checking engine start system
CAUTION
TO avoid personal injury
⚫ Do not allow anyone near the vehicle
while testing.
⚫ If the vehicle does not pass the test, do
not operate the vehicle.
◆ Preparation before testing
1. Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆ Test gear shift range lever safety switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “L”, “H”,
“N” or REVERSE position.
① Range gear shift lever
■ Checking wheel bolt torque
CAUTION
To avoid personal injury
⚫ Never operate vehicle with a loose
wheel bolts.
⚫ Any time these bolts are loosened they
should be retightened to the specified
torque.
⚫ Check all bolts frequently and keep
them tight.
Check wheel bolts regularly especially when
new if they are loose tighten them as
follows:
To Next Page
