EasyManua.ls Logo

Hisun HS294-2 - Checking Gauges Meter and Easy Checker Lamps; Checking Head Light Turn Signal Light Etc

Hisun HS294-2
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. If it is below the “LOWER” mark add brake
fluid .
OIL CUP LOWER
Checking brake pedal
CAUTION
TO avoid personal injury:
Stop the engine and chock the wheels
before checking brake pedal.
1.Inspect the brake pedals for free play and
smooth operation.
Adjust if incorrect measurement is found. (see
checki n g brake pedal in EVERY 20 0
HOURS in PERIODIC SERVICE section)
with the key switch in the "ON" position and
the parking brake indicator should come on.
To release the parking brake, depress the
parking pedal.
Make sure the parking brake warning lamp on
the display goes off when parking brake is
applied.
Parking brake
Checking gauges meter and easy
checker™ lamps
1. Inspect the instrument panel for broken
gauges meter and warning lamps.
2. Replace if broken.
Checking head light turn signal light etc
1. Inspect lights for broken bulbs and lenses
2. Replace if broken

Table of Contents