OPERATOR'S STATION
1-67
M178-01-072
6 7
89
3
1
M1U1-01-025
DEFROSTER OPERATION
Press mode switch (6) (either the front or front/rear vent
mode switch). Set temperature control switch (8) to the
heat operation position. Press fresh air mode switch (7).
Press blower switch (9). Warm air will blow out from the front
or front/ rear vents.
Adjust air flow direction from front vent (1) and defroster vent
(3) by controlling the louver direction.
Use temperature control switch (8) and blower switch (9) to
adjust air temperature in the cab.
To Next Page
Loading...
