MAINTENANCE
7-4
MAINTENANCE GUIDE TABLE
The maintenance guide table is affixed to the reverse side of
the tool box cover. Lubricate and/or service the parts at the
intervals as instructed in the table so that all necessary mainte-
nance can be performed regularly.
•
Symbol Marks

The following marks are used in the maintenance guide
table.
Grease
(Front Joint Pin, Swing Bearing, Swing
Gear)
Hydraulic Oil Filter
(Pilot Filter, Hydraulic Oil Tank Filter, Suc-
tion Filter)
Gear Oil
(Travel Reduction Device, Swing Reduction
Device)
Air Cleaner Element
Engine Oil
Coolant
(Long-Life Coolant)
Engine Oil Filter
Fuel Filter
(Fuel Main Filter, Pre-Filter)
Hydraulic Oil
To Next Page
Loading...
Need help?
General
