Hitachi Compute Blade 500 Series - System Unit Specifications; Server Chassis Specifications

System Unit Specifications
This section describes specifications for the system unit.
Server Chassis Specifications
The following table provides the server chassis specifications.
Table 2-1 Server Chassis Specifications
Items Specifications
Enclosure Rack mount type 6 U
Number of modules
that can be installed
Server blades Up to 8 blades
Management modules Up to 2 modules
Switch
modules
Up to 4 modules
Switch bays #0 and #1 Up to 2 modules
Same type of modules
must be installed.
FC switch module is not
available.
Switch bays #2 and #3 Up to 2 modules
Same type of modules
must be installed.
Power supply
modules
Power supply bays Up to 4 units
Redundant
configuration
Rated at 100
Vac
1+1 or 2+1 or 2+2 or 3+1
Rated at 200
Vac
1+1 or 2+1 or 2+2 or 3+1
Power input 100 Vac: 3597 W / 200
Vac: 5140 W
Fan modules 6 modules as standard (N
+M modules
configuration)
External dimensions (W x D x H: mm)/number of units according to the EIA
standard
447 x 791 x 262 / 6 U
Mass Maximum: 130 kg
(with all modules
installed; including rack
rails)
Power source Input voltage (Frequency) Single Phase AC
100-120 V / 200-240 V
(50-60 Hz)
Power consumption (Maximum)
1
4678 W
Environmental
requirements
Temperature 5 to 40°C [Non-operating:
-10 to 43 °C]
3
2-2
Specification
Hitachi Compute Blade 500 Series System Overview Guide