Location Form factor Slot
Order of
installation
16 HDD slot 1 2
17 HDD slot 0 3
18 HDD slot 1 3
19 HDD slot 0 4
20 HDD slot 1 4
Indicators
Figure 1-25 Indicators
Table 1-12 Indicators for SAS HDD/SAS SSD
Location Name State Description
1 Active LED Green-On SAS drive is in idle status.
Green-Blink SAS drive is in either start,
active, or rebuilding as the
source drive status.
2 Fault LED Amber-On An error occurs in SAS
drive
1
.
Amber-Blink SAS drive is in rebuilding as
the source drive status.
Notes:
1. The LED may be turned on due to initializing after activating. However, this situation
is not error when the LED is turned off about a minute later. If the LED is not turned
off, contact the sales representative or maintenance personnel.
Table 1-13 Indicators for SATA HDD
Location Name State Description
1 Active LED Green-Blink SATA drive is accessed; the source drive is used for
rebuilding.
2 Fault LED Amber-On An error occurs in the drive.
System Overview
1-23
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
