Hitachi Compute Blade 500 Series - Server Blade Specifications

Items Specifications
Humidity 20 to 80 % [Non-
operating: 10 to 90 %]
EMC regulations FCC, ICES, EN55022,
EN55024, EN61000, KC
KN24,
KC KN22, C-Tick, GOST,
BSMI, CCC
Noise
60db (A) or lower
2
Notes:
1. This value is the rating of the server chassis. Actual power consumption depends on the
configuration of the server blades.
2. This equipment controls fan rotation according to the temperature of the inlet air. Under the
following conditions, the noise level may exceed this value.
¢
Inlet air temperature exceeds 25°C.
¢
CPU is under heavy load.
¢
Fan fails.
¢
CB 520H B2 server blade has E5-2637v2 installed.
3. 5 to 30°C [Non-operating: -10 to 43°C] for CB 520H B2 with CPU E5-2637v2 installed.
5 to 35°C [Non-operating: -10 to 43°C] for CB 520H B3 with CPUE5-2699v3, E5-2697v3, E5-2667v3
and E5-2637v3 installed.
Server Blade Specifications
The following table provides specifications for server blades.
Table 2-2 Xeon Server Blade CPU specification (CB 540A A1/B1)
Items Specifications
Supported CPU E5-4650 E5-4610 E5-4603
Number of Cores 8 C 6 C 4 C
CPU frequency 2.7 GHz 2.4 GHz 2.0 GHz
QPI frequency 8.0 GT/s 7.2 GT/s 6.4 GT/s
L3 cache 20 M 15 M 10 M
TDP 130 W 95 W 95 W
Number of CPUs Maximum: 4
Table 2-3 Xeon Server Blade other specification (CB 540A A1/B1)
Items Specifications
Main memory DIMM type (per slot) DDR3 RDIMM, 2 / 4 / 8 / 16 / 32 GB; LR-DIMM
32 GB
Specification
2-3
Hitachi Compute Blade 500 Series System Overview Guide