Hitachi Compute Blade 500 Series - Page 50

Items Specifications
Operating mode Independent channel mode, Rank sparing
mode, Mirrored channel mode
Number of slots 48
Memory capacity Maximum: 1024 GB (RDIMM 32 GB x 32);
1536 GB (LR-DIMM 32 GB x 48)
Memory frequency 800 / 1066 / 1333 / 1600 MT/s
HDD/SSD Number of HDDs Maximum: 2
Capacity
1
Maximum: 1.8 TB
I/O Internal disk
I/F
Controller LSI SAS 2004 / LSI SAS 2008
I/F SAS
Number of I/F Maximum: 2 (2.5 inch SAS HDD, SSD)
RAID function RAID 0.1
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Onboard LAN
2
Midplane I/F 10 Gb/1 Gb Ethernet 2 port
Function Wake on LAN, PXE boot, iSCSI
Management
function
Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB 1 (USB2.0)
KVM connector 1 (VGA / COM / USB2.0 / 2port)
DCMI (Data Center Management Interface) Not supported
Power consumption 1103 W
External dimension (W x D x H: mm) 435.3 x 492.7 x 51.1
Mass Maximum: 13.3 kg
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. A1 model does not come with the onboard LAN.
Table 2-4 Xeon Server Blade CPU specification (CB 520H A1/B1) - 1
Items Specifications
Supported CPU E5-2680 E5-2670 E5-2640
Number of Cores 8 C 8 C 6 C
2-4
Specification
Hitachi Compute Blade 500 Series System Overview Guide