Items Specifications
L3 cache 20 M 15 M 15 M 10 M 15 M
TDP 95 W 95 W 95 W 80 W 60 W
Number of CPUs Maximum: 2
Table 2-14 Xeon Server Blade other specification (CB 520A A1)
Items Specifications
Main memory DIMM type (per slot) DDR3 RDIMM, 2 / 4 / 8 / 16 / 32 GB
Operating mode Independent channel mode, Rank sparing mode,
Mirrored channel mode
Number of slots 12
Memory capacity Maximum: 384 GB (32 GB x 12)
Memory frequency 800 / 1066 / 1333 / 1600 MT/s
HDD/SSD Number of HDDs Maximum: 2
Capacity
1
Maximum: 2 TB
I/O Internal disk
I/F
Controller LSI SAS 2004 / LSI SAS 2008 or Patsburg
I/F SAS/SATA
Number of I/F Maximum: 2 (2.5 inch SAS HDD, SATA HDD, SSD)
RAID function RAID 0.1
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Internal USB port USB2.0 x 2port (For LPAR manager)
Management
function
Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB 1 (USB2.0)
KVM connector 1 (VGA / COM / USB2.0 / 2port)
DCMI (Data Center Management Interface) Not supported
Power consumption 396 W
External dimension (W x D x H: mm) 215.4 x 492.7 x 51.1
Mass Maximum: 6.2 kg
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2-10
Specification
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
