18
Backup battery replacement
Backup battery replacement
The backup battery is already mounted at the factory.
If the time/date can not maintain accurate information, the alarm message “BACKUP BATT EMPTY” is
shown on PIX OUT for about 6 seconds at start-up. In this case, the battery should be replaced, and
the date and time should be adjusted at the TIME/DATE menu.
WARNING
Be sure to replace the battery with a type CR2032 lithium battery. Using another
type of battery can damage the camera and pose a fire hazard.
Also be sure to dispose of the depleted battery as prescribed by local ordinance
(e.g., return it to the dealer). Do not dispose of the battery with combustible waste,
as this may pose a fire, safety and environmental hazard.
To Next Page
Loading...
