Hitachi DVPF3E - To Skip a Preset Channel; Channel Order

EN
2C15
The channels you can no longer receive or seldom
watch can be set to be skipped when you access chan-
nels PROG (o/p).
• Use the remote control for this procedure.
1 Press MENU.
2 Press Arrow (o/p) to select “INITIAL”, then
press Arrow (
B).
3 Press Arrow (o/p) to select “CH TUNING”,
then press Arrow (
B).
4 Press Arrow (o/p) to select “MANUAL”,
then press Arrow (
B).
5 Press Arrow (o/p) to select “POSITION”,
then press Arrow (
B).
6 Press Number, or Arrow (o/p) to select rel-
evant position number, then press Arrow
(
B).
7 Press Arrow (o/p) to select “SKIP”, then
press Arrow (
B) to select [ON].
• To memorise the channel again, press Arrow (B)
“ON” will change to “OFF”.
8 Press MENU to exit.
Note
To confirm that a channel has been deleted, press
PROG (o/p).
VCR
You can arrange the channels in any order you want as
follows.
• Use the remote control for this procedure.
1 Press MENU.
2 Press Arrow (o/p) to select “INITIAL”, then
press Arrow (
B).
3 Press Arrow (o/p) to select “CH TUNING”,
then press Arrow (
B).
4 Press Arrow (o/p) repeatedly to select
“MOVE”, then press Arrow (
B).
5 Press or Arrow (o/p) repeatedly to select
the position number you want to change
the channel, then press
Arrow (
B).
• You cannot select a position number where “- -”
appears next to the number. This is because SKIP is
set to [ON] for this position number.
• When a weak signal is received in Channel Order
mode, you can change the background to static blue
by pressing CLEAR/C.RESET. If you press the but-
ton again, the background will return to the static
screen.
6 Press Arrow (o/p) repeatedly until the
channel move to another position number,
then press Arrow (
B).
7 Press MENU to exit.
VCR
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
GUIDE CHANNEL
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P08
008
[OFF]
[ON]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
GUIDE CHANNEL
CH TUNING
AUTO
MANUAL
MOVE
MOVE
P01:
P02:
P03:
P04:
P05:
02
03
11
05
06
P06:
P07:
P08:
P09:
P10:
07
08
09
10
04
[ ]
MOVE
P01:
P02:
P03:
P04:
P05:
02
03
04
05
06
P06:
P07:
P08:
P09:
P10:
07
08
09
10
11
Position
Number
Channel
Number
[ ]
TO SKIP A PRESET CHANNEL CHANNEL ORDER
–
20
–
H9550ED.qxd 03.5.20 3:07 PM Page 20