Hitachi DVPF3E - Advanced Disc Navigation

–
31
–
EN
2C15
English
–
31
–
EN
2C15
SLOW FORWARD /
SLOW REVERSE
1 During playback, press PAUSE/STEP ( k ).
2 Press g or h .
3 Press g or h repeatedly to select the
required speed: 1/16, 1/8, 1/2 of the normal
playback.
4 To return to normal playback, press PLAY ( B).
DVD
ZOOM
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
1 Press ZOOM during playback.
¡
Playback will continue.
2 Press ZOOM repeatedly to select the
required zoom factor: x2, x4 or OFF.
3 Use the Arrow (K/L/s / B) to move the
zoomed picture across the screen.
4 To exit zoom mode, press ZOOM to OFF.
Notes
¡Zooming function does not work while disc menu is
shown.
¡x4 zoom is not available on some discs.
DVD
TRACK
There are three ways to begin playback on an Audio
CD at a specific Track.
Using the Numerical buttons
1 Press Numerical buttons to enter the
desired Track number.
¡
Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6 on the numerical
button.
Using SEARCH MODE
1 Press SEARCH MODE.
¡
The track search display appears.
2 Within 30 seconds, select a desired track
number using numerical buttons.
¡For single digits press 0 first.
¡Playback will start at the selected track.
¡Press CLEAR/C.RESET to erase the incorrect input.
CD
Using SKIP H , G
During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡Track number will appear briefly on the DVD/VCR
display panel.
¡If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the
next track.
Note
¡SKIP H, G are not available when playback is
stopped.
TITLE / CHAPTER SEARCH
1 Press SEARCH
MODE once for the
Chapter search,
twice for the Title search during playback.
2 Enter the desired chapter/title number using
numerical buttons.
¡
Playback will start at the selected Chapter or Title.
¡Press CLEAR/C.RESET to erase the incorrect input.
¡
For single digits press 0 first.
DVD
/2
TIME SEARCH
1 During playback, press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using numerical buttons.
¡
Playback will start at the specified time.
3 Press CLEAR/C.RESET to erase the incor-
rect input.
CD DVD
H9550ED.qxd 03.5.20 3:08 PM Page 31