Hitachi DVPF3E - Programme (CD); Random Playback (CD); Mp3 Playback; On Screen Information

–
33
–
EN
2C15
English
–
33
–
EN
2C15
English
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the original sequence.
1 In stop mode, press
MODE twice.
¡
RANDOM screen
appears.
2 Press PLAY ( B)to start random playback.
Note
¡If you like to repeat the current track in the random
selection, press REPEAT repeatedly until
TRACK appears during playback. If you like to
repeat the entire random selection press REPEAT
repeatedly until ALL appears during playback.
CD
PLAY
CD [AUDIO] TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
When a CD with MP3 files is inserted in the
DVD/VCR, the MP3 menu will appear on the TV
screen, and number of tracks is displayed on the front
panel.
1 In stop mode, press Arrow (K/L) to select
the desired group track.
¡ If a group is selected, press
Arrow (B) or ENTER to go
on to the track selection
screen. Press Arrow (K/L) to
choose a track, then press
PLAY (B) or ENTER.
¡If a track is selected, press
PLAY (B) or ENTER to
start playing tracks. Starting from the one you’ve
just chosen the subsequent tracks will be played.
¡Choose FIRST PLAY to start playback from the
beginning of the listed tracks.
¡Press TOP MENU to return to the first item.
2 Press STOP ( C ) to stop playback.
Notes
¡Folders are known as Groups; files are known as
Tracks.
¡MP3 files are accompanied by icon.
¡Maximum of 255 folders can
be recognised.
¡Maximum of 256 files can be recognised.
¡Up to 8 hierarchies can be created.
This player recommends the use of files recorded at the
below specifications:
¡Sampling frequency: 44.1kHz or 48kHz
¡Constant bit rate: 112kbps ~ 320kbps.
3
MP3
MP3 PLAYBACKPROGRAMME
You may determine the order in which tracks will play.
1 In stop mode, press MODE.
¡
The PROGRAM screen will appear.
2 Press Arrow (▲ / ▼)
to select a track, then
press ENTER.
¡
Press CLEAR/C.RESET
to erase the most recently
entered programme.
3 Press PLAY ( B) to play the programmed
tracks.
Notes
¡While the programme is being played back, the
STOP works as follows.
¡Press STOP (C) once and then PLAY (B) again,
playback will restart from the point where STOP
was pressed. (Programme continued)
¡Press STOP (C) twice and then PLAY (B) again,
playback will restart from the track in the usual way.
(Programme cleared)
¡Up to 99 programmes can be entered.
¡If you like to repeat the current track in the pro-
gramme, press REPEAT repeatedly until TRACK
appears during playback. If you like to repeat the
entire programme press REPEAT repeatedly until
ALL appears during playback.
TO CLEAR THE PROGRAMME
¡Open the disc loading tray, and the the programme
will be cleared.
CD
TOTAL
ON SCREEN
INFORMATION
You can check the MP3 files during playback.
1 Press DISPLAY.
¡
The name of the file currently in play will be dis-
played.
2 Press DISPLAY again to show the track
number, the repeat status, and the playback
status at the top of the screen.
¡ will be displayed when repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates ALL repeat
3 Press DISPLAY again to exit.
MP3
H9550ED.qxd 03.5.20 3:08 PM Page 33