Hitachi EH-150 - Task Code H35 Read Memory Assignment

Appendix B Task Codes Specifications
Task code H35 Read memory assignment Classification Memory read
Function
Reads the assigned memory capacity data.
Execution condition
CPU status
STOP RUN HALT ERROR
{ { { { READ occupancy Occupancy
{ { { { WRITE occupancy status
Format
Request
H35 H00
Response
(a) H35 (b) (c)
(d)
(a) Response task code (H00 when executed normally)
For task codes other than the normal task codes, refer to the “response list by task code” at the end of this chapter.
(b) Parameter area memory capacity (H00000280 fixed)
(c) HI-FLOW user program memory capacity (8 digit hexadecimal) *
(d) HI-LADDER use program memory capacity (8 digit hexadecimal)
* EH-150 does not support HI-FLOW.
B-30