Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
96
Table 72: Enable/Disable Address Offset Mode
10.15.2 Identify Device Data
Identify Device data, word 83, bit 7 indicates the device supports the Address Offset Feature. Identify Device data,
word 86, bit 7 indicates the device is in Address Offset mode.
10.15.3 Exceptions in Address Offset Mode
Any commands which access sectors across the original native maximum LBA are rejected with error, even if the
access protection is removed by a Set Max Address command.
Read Look Ahead operation is not carried out, even if it is enabled by the Set Feature command.
To Next Page
Loading...
