Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
214
12.44 Standby Immediate (E0h/94h)
Table 163: Standby Immediate (E0h/94h)
The Standby Immediate command causes the device to enter the Standby mode immediately.
The device is spun down but the interface remains active. If the device is already spun down, the spin down
sequence is not executed.
During the Standby mode the device will respond to commands, however there will be a delay while waiting for
the spindle to reach operating speed.
The Standby Immediate command will not affect the auto power down time-out parameter.
Command Block Output Registers Command Block Input Registers
Register 7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0
Data - - - - - - - - Data - - - - - - - -
Feature - - - - - - - - Error see below
Sector Count - - - - - - - - Sector Count - - - - - - - -
Sector Number - - - - - - - - Sector Number - - - - - - - -
Cylinder Low - - - - - - - - Cylinder Low - - - - - - - -
Cylinder High - - - - - - - - Cylinder High - - - - - - - -
Device/Head 1 - 1 D - - - - Device/Head - - - - - - - -
Command 1 0 1 1 0 0 0 0 Status see below
Error Register Status Register
7654321 0 76543 21 0
CRC UNC 0 IDN 0 ABT T0N AMN BSY RDY DF DSC DRQ COR IDX ERR
00000V0 0 0V0V- 0- V
To Next Page
Loading...
