Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
30
6.4.1.1 TX+ / TX
These signal are the outbound high-speed differential signals that are connected to the serial ATA cable.
6.4.1.2 RX+ / RX
These signals are the inbound high-speed differential signals that are connected to the serial ATA cable.
The following standard shall be referenced about signal specifications. Serial ATA: High Speed Serialized AT Attachment
Revision 1.0a 7-January, 2003
6.4.2 Out of band signaling (SATA model)
Table 19: The timing of COMRESET, COMINT and COMWAKE
Table 20: Parameter descriptions
PARAMETER DESCRIPTION Nominal (ns)
t1 ALINE primitives 106.7
t2 Spacing 320
t3 ALIGN primitives 106.7
t4 Psacing 106.7